Adjusting image focus

Image focus might need adjusting when Artome device is moved and the projection distance changes.

Artome S1

1. Locate the projector cooling vent. Push the hatch on the top to open the vent.
2. Open the cooling vent.
3. Adjust the focus lever until the image is clear.

Artome M10

1. Open the front door of the device.
2. The focus lever is positioned next to the projector's physical buttons.
3. Adjust the focus lever until the image is clear.

Artome X20

1. Power on the projector and use the Epson remote control.
2. Use the Focus buttons on the remote to adjust the focus.