This feature is supported by hardware version 231 and later. Recognizing your product
Artome Connect app has additional audio settings to further customize your device to your specific use case. Audio settings vary between hardware versions and device models.
All of these settings are persistent and can only be adjusted from the app. Audio settings are located in Configure > Audio Settings
Startup Volume
Startup level adjusts the startup volume of the device.
Bass and Treble Volume
Bass level controls bass frequencies. Treble level controls higher frequencies. Use the sliders to adjust the audio to desired level.
Audio Out Volume
Audio out level controls the output volume of audio out connectors. This setting is available for devices with audio out connectors.
Aux In Volume
Aux in level controls the volume of the unbalanced audio. This setting is available for devices with aux in connector.
Artome Speaker Mute
This setting allows disabling Artome internal speakers when an external PA system is used.
Mic/Line Selector
This setting allows selecting whether the XLR inputs work on mic or line level. When line level is selected, an additional input gain control appears. By default the inputs are on mic level.
For HW232 devices the input sensitivity is changes. For HW231 devices only the microphone dynamics are disabled. Recognizing your product
Reset Audio Settings To Default
The reset button returns the above audio settings to their default values.