Skip to main content

Switching audio input mode

Updated

Mic/Line selector with Artome Remote is supported by firmware version 4.0.8 and later. Checking your firmware version

 

You can switch the input mode of MIC1 and MIC2 inputs between mic and line level.

 

Artome remote

  1. Turn on the device.
  2. Long-press the MUTE button on the remote for 10 seconds. Two left-most LEDs on the button panel illuminate and a chime is heard.
  3. Use the up/down buttons to select between line and mic level input mode.
    1. Mic mode is indicated by blinking POWER button.
    2. Line mode is indicated by blinking SOURCE button.
      1. When line mode is selected, use left/right buttons to adjust the input gain (-60dB - +24dB)
  4. Confirm the selection with MUTE button.

 

Artome Connect

Swtiching input mode with Artome Connect is possible from firmware version 3.3.3.

Please see Extended audio settings

Related articles